Resistors :
1x 2r2
1x 10r
3x 100r 
1x 150r  
2x 820r
1x 1K
1x 1K5
1x 1K8
1x 2K2
1x 3K3
1x 5K1
1x 10K
1x 15K   
3x 22K
5x 27K
2x 47K
3x 68K
3x 100K - 1%
7x 120K - 1%
1x 470K  
1x 680k    
1x 1M

Ferrite :
2x Ferrite beads

Inductors :
1x Dunlop wah inductor 500mH
or 1x Fasel Inductor 500mH

Ceramic capacitors :
4x 100p
1x 470p  
5x 100n

Film capacitors :
1x 6n8
2x 10n 
1x 22n 
1x 27n
2x 47n
1x 68n
1x 100n   
2x 470n

Electrolytic capacitors, all rated for 35V or higher :
1x 2,2µ   
1x 10µ Bipolar
2x  47µ                                       
1x 100µ                                            
1x 220µ                                                   
1x 470µ    
1x 1000µ                                                                                            
                                          
Diodes :
4x 1N4148
1x 3mm Red LED                                                                                                        

ICs :
1x LM311
1x TLO72ACP
2x TL074
1x THAT 2180C

Switchs :
1x SPDT ON-OFF-ON toogle switch
1x DPDT ON-ON Sub-mini toogle switch (the ones that are even smaller than standard toogle switchs)
1x MBB (make before break/shorting) Rotary Switch 2P6T with PCB pins, used in 1P5T configuration

Jack & led sockets :
6x Mono 6,35" Jack sockets
1x 3mm led socket

Potentiometers :
1x 5K REV LOG (Solid Shaft for using the same knobs as me)
5x 100K LIN (for using the same knobs as me : 1x Solid Shaft, 4x Split Shaft)
3x 100K LOG (Solid Shaft for using the same knobs as me)

Knobs suggestion : 
5x Eagle knobs 19mm fluted for solid shaft pots
1x Davies 1510 knob for solid shaft pots
4x Knobs with a diameter between 12 and 14mm, fiting split shaft pots

Optional connectors :
4x 6-pins molex or equivalent 2,54mm spacing
1x 8-pins molex or equivalent 2,54mm spacing

Screws & spacers :
4x M3 spacers between 30 & 45mm
8x M3 screws